> ## Documentation Index
> Fetch the complete documentation index at: https://docs.sync.cdata.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Sansan

You can use the Sansan connector from the CData Sync application to capture data
from Sansan and move it to any supported destination. To do so, you need to add
the connector, authenticate to the connector, and complete your connection.

## Add the Sansan Connector

To enable Sync to use data from Sansan, you first must add the
connector, as follows:

<ol>
  <li>Open the **Connections** page of the Sync dashboard.</li>
  <li>Click **Add Connection** to open the **Select Connectors** page.</li>
  <li>Click the **Sources** tab and locate
  the **Sansan** row.</li>

  <li>
    Click the **Configure Connection** icon at the end of that row to open
    the **New Connection** page. This action opens the
    **Add Connection** dialog.

    **Note:** If the **Configure Connection** icon is not
    available, click the **Download Connector** icon to install
    the Sansan connector.
  </li>

  <li>Enter a name for your connection in the **Add Connection** dialog.</li>
  <li>Click **Add** to open the **Settings** tab for your connector.</li>
</ol>

For more information about installing new connectors, see
[Connections](https://docs.sync.cdata.com/26.4/en/connections/connections.md).

## Authenticate to Sansan

After you add the connector, you need to set the required properties.

* **API Key:** Enter the API key for your account. To locate the API key:
  1. Log in to the [Sansan management page](https://ap.sansan.com/v/home/) and select **3rd Party Integration > API**.
  2. Select the target department from the **Please select department** drop-down list.
  3. Select the target user from the **Please select user** drop-down list.
  4. Click **Issue** to generate the API key.

## Complete Your Connection

To complete your connection:

1. Specify the following properties:
   * (Optional) **Range:** Enter the Sansan range of holders for acquisition. Possible values are **me** and **all**. The default value is **all**.
   * **Include Past Bizcards:** Select whether to include past Bizcards. By default, the **Enable** checkbox is not selected.
2. Define advanced connection settings on the **Advanced** tab. (In most cases, though, you should not need these settings.)
3. Click **Connect to Sansan** to connect to your Sansan account.
4. Click **Create & Test** to create your connection.

## More Information

For more information about interactions between CData Sync and Sansan, see
[Sansan Connector for CData Sync](https://cdn.cdata.com/help/USN/synch/default.htm).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.