> ## Documentation Index
> Fetch the complete documentation index at: https://docs.sync.cdata.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Sage Intacct

export const CommonAuthSchemeOktaSso = ({siteName = "CData Sync", siteNameShort = "Sync", datasource = "the data source"}) => {
  return <>
      <p>Okta を介したシングルサインオン（SSO）で接続するには、次のプロパティを指定します：</p>
      <ul>
        <li><strong>Auth Scheme：</strong><strong>OKTA</strong> を選択。</li>
        <li><strong>User：</strong>Okta アカウントへの認証に使用するユーザー名を入力。</li>
        <li><strong>Password：</strong>Okta アカウントへの認証に使用するパスワードを入力。</li>
        <li><strong>SSO Login URL：</strong>シングルサインオン（SSO）プロバイダーが使用するログインURL を入力。</li>
        <li><strong>SSO Properties：</strong>使用するシングルサインオン（SSO）プロパティをセミコロン区切りで入力（例えば、<em>SSOProperty1</em>=<em>Value1</em>;<em>SSOProperty2</em>=<em>Value2</em>;...）。</li>
      </ul>
    </>;
};

export const CommonDatasourceMoreInformation = ({datasource = "the data source", advancedurl = "", siteName = "CData Sync", driverVersion = ""}) => {
  return <>
      <p>
        {siteName} と{datasource} の連携について、詳しくは{' '}
        <a href={`https://cdn.cdata.com/help/${advancedurl}${driverVersion}/jp/synch/default.htm`}>
          {datasource} Connector for {siteName}
        </a> を参照してください。
      </p>
    </>;
};

export const CommonDatasourceAddConnector = ({datasource = "the data source", title = "the connector", destination = false, siteNameShort = "Sync"}) => {
  return <>
      <p>
        {siteNameShort} で{datasource} のデータを使用できるようにするには、まず以下の手順でコネクタを追加する必要があります：
      </p>
      <ol>
        <li>{siteNameShort} のダッシュボードから<strong>接続</strong>ページを開きます。</li>
        <li><strong>接続を追加</strong>をクリックして<strong>コネクタを選択</strong>ページを開きます。</li>
        <li>
          <strong>{destination ? "同期先" : "データソース"}</strong>タブをクリックして
          <strong>{title}</strong> 行に移動します。
        </li>
        <li>
          行末にある<strong>接続を設定</strong>アイコンをクリックして、<strong>新しい接続</strong>ページを開きます。この操作により、{' '}
          <strong>接続を追加</strong>ダイアログボックスが開きます。
          <br />
          <strong>Note：</strong> <strong>接続を設定</strong>アイコンが表示されない場合は、<strong>コネクタをダウンロード</strong>アイコンをクリックして {title} コネクタをインストールしてください。
        </li>
        <li><strong>接続を追加</strong>ダイアログボックスに接続名を入力します。</li>
        <li><strong>追加</strong>をクリックして、コネクタの<strong>設定</strong>タブを開きます。</li>
      </ol>
      <p>
        新しいコネクタのインストールについての詳細は、{' '}
        <a href="../connections">接続</a>を参照してください。
      </p>
    </>;
};

export const CommonDatasourceIntroSource = ({datasource = "the data source", siteName = "CData Sync"}) => {
  return <p>
      {siteName} アプリケーションから{datasource} コネクタを使用して、{datasource} からデータを取得してサポートされている任意の同期先に移動できます。これを行うには、コネクタを追加し、コネクタへの認証を行い、接続を完了する必要があります。
    </p>;
};

export const driverVersion = "M";

export const siteNameShort = "Sync";

export const siteName = "CData Sync";

export const datasource = "Sage Intacct";
export const pageTitle = "Sage Intacct";
export const advancedurl = "CT";
export const oauthschemes = "AzureAD";

<CommonDatasourceIntroSource datasource={datasource} siteName={siteName} />

## Prerequisites

In addition to creating a {datasource} account, you also need to perform these prerequisites:

* Enable a Web Services subscription by navigating to **Company > Admin > Subscriptions**.
* Create a Web-Services user account without UI access. {datasource} recommends that you create a Web-Services-only user, which you can do by navigating to **Company > Admin** and clicking the plus sign (+) next to **Web Services users**.

  <Note>Web Services users are programmatic users and never log into the UI. Therefore, both single sign-on and multifactor authentication are disabled automatically for them.</Note>

You can establish a connection to {datasource} using either the embedded credentials or with your own credentials.

Before you connect from {siteName}, you must also authorize CData as a valid sender identifier (Id) in {datasource}.

To authorize the sender Id:

1. Log in to {datasource} as an administrator.
2. Navigate to **Company > Setup > Company**.
3. Locate the **Web Services authorizations** list in the **Security** section.
4. Add **CData** to the list of authorized sender Ids. (This value is case sensitive.)

## Sage Intacct コネクタを追加

<CommonDatasourceAddConnector datasource={datasource} title={pageTitle} destination={false} siteNameShort={siteNameShort} />

## Sage Intacct への認証

After you add the connector, you need to set the required properties.

**Company ID:** Enter the company Id of the user who is authenticating to the {datasource} server.

{siteName} supports authenticating to {datasource} in several ways. Select your authentication method below to proceed to the relevant section that contains the authentication details.

* [**Basic Read Only**](#basic-read-only)
* [**Basic**](#basic)
* [**Okta**](#okta)
* [**Azure Active Directory**](#azure-active-directory)

### Basic Read Only

{siteName} provides embedded Web Services credentials (**SenderID** and **SenderPassword**) that you can use to read data from {datasource}. To allow authentication with the embedded credentials, specify the following settings:

* **Auth Scheme:** Select **BasicReadOnly**
* **User:** Enter the username that you use to authenticate to {datasource}.
* **Password:** Enter the password that you use to authenticate to {datasource}.

### Basic

{siteName} provides embedded Web Services credentials (**SenderID** and **SenderPassword**) that you can use to read data from {datasource}. To connect with your user credentials, set the following properties:

* **Auth Scheme:** Select **Basic**.
* **User:** Enter the username that you use to authenticate to {datasource}.
* **Password:** Enter the password that you use to authenticate to {datasource}.

### Okta

<CommonAuthSchemeOktaSso siteName={siteName} siteNameShort={siteNameShort} datasource={datasource} />

### Azure Active Directory

To connect with single sign-on via Azure Active Directory, specify the following settings:

* **Auth Scheme:** Select **AzureAD**.
* **SSO Properties:** Enter the single sign-on (SSO) properties that you want to use (for example, *SSOProperty1*=*Value1*;*SSOProperty2*=*Value2*;...).

## 接続を完了する

To complete your connection:

1. Define advanced connection settings on the **Advanced** tab. (In most cases, though, you should not need these settings.)
2. {oauthschemes ? `If you authenticate with ${oauthschemes}, click` : "Click"} **Connect to {datasource}** to connect to your {pageTitle} account.
3. Click **Create & Test** to create your connection.

## 詳細について

<CommonDatasourceMoreInformation datasource={datasource} advancedurl={advancedurl} siteName={siteName} driverVersion={driverVersion} />