> ## Documentation Index
> Fetch the complete documentation index at: https://docs.sync.cdata.com/llms.txt
> Use this file to discover all available pages before exploring further.

# MariaDB

export const CommonDatasourceMoreInformation = ({datasource = "the data source", advancedurl = "", siteName = "CData Sync", driverVersion = ""}) => {
  return <>
      <p>
        {siteName} と{datasource} の連携について、詳しくは{' '}
        <a href={`https://cdn.cdata.com/help/${advancedurl}${driverVersion}/jp/synch/default.htm`}>
          {datasource} Connector for {siteName}
        </a> を参照してください。
      </p>
    </>;
};

export const CommonAuthSchemeLdap = ({siteName = "CData Sync", siteNameShort = "Sync", datasource = "the data source"}) => {
  return <>
      <p>LDAP 認証情報で接続するには、次のプロパティを指定します：</p>
      <ul>
        <li><strong>Auth Scheme：</strong><strong>LDAP</strong> を選択。</li>
        <li><strong>User：</strong>{datasource} アカウントへの認証に使用するユーザー名を入力。</li>
        <li><strong>Password：</strong>{datasource} アカウントへの認証に使用するパスワードを入力。</li>
      </ul>
    </>;
};

export const CommonAuthSchemeAzuremsi = ({siteName = "CData Sync"}) => {
  return <>
      <p>
        Azure 仮想マシン上で{siteName} が実行されている場合にAzure マネージドサービスID（MSI）を利用するには、<strong>Auth Scheme</strong> で<strong>Azure MSI</strong> を選択します。追加のプロパティは必要ありません。
      </p>
    </>;
};

export const CommonAuthSchemePassword = ({siteName = "CData Sync", siteNameShort = "Sync", datasource = "the data source"}) => {
  return <>
      <p>ユーザー資格情報で接続するには、次のプロパティを設定します：</p>
      <ul>
        <li><strong>Auth Scheme：</strong><strong>Password</strong> を選択。</li>
        <li><strong>User：</strong>{datasource} アカウントへの認証に使用するユーザー名を入力。</li>
        <li><strong>Password：</strong>{datasource} アカウントへの認証に使用するパスワードを入力。</li>
      </ul>
    </>;
};

export const CommonDatasourceAddConnector = ({datasource = "the data source", title = "the connector", destination = false, siteNameShort = "Sync"}) => {
  return <>
      <p>
        {siteNameShort} で{datasource} のデータを使用できるようにするには、まず以下の手順でコネクタを追加する必要があります：
      </p>
      <ol>
        <li>{siteNameShort} のダッシュボードから<strong>接続</strong>ページを開きます。</li>
        <li><strong>接続を追加</strong>をクリックして<strong>コネクタを選択</strong>ページを開きます。</li>
        <li>
          <strong>{destination ? "同期先" : "データソース"}</strong>タブをクリックして
          <strong>{title}</strong> 行に移動します。
        </li>
        <li>
          行末にある<strong>接続を設定</strong>アイコンをクリックして、<strong>新しい接続</strong>ページを開きます。この操作により、{' '}
          <strong>接続を追加</strong>ダイアログボックスが開きます。
          <br />
          <strong>Note：</strong> <strong>接続を設定</strong>アイコンが表示されない場合は、<strong>コネクタをダウンロード</strong>アイコンをクリックして {title} コネクタをインストールしてください。
        </li>
        <li><strong>接続を追加</strong>ダイアログボックスに接続名を入力します。</li>
        <li><strong>追加</strong>をクリックして、コネクタの<strong>設定</strong>タブを開きます。</li>
      </ol>
      <p>
        新しいコネクタのインストールについての詳細は、{' '}
        <a href="../connections">接続</a>を参照してください。
      </p>
    </>;
};

export const CommonDatasourceIntroSource = ({datasource = "the data source", siteName = "CData Sync"}) => {
  return <p>
      {siteName} アプリケーションから{datasource} コネクタを使用して、{datasource} からデータを取得してサポートされている任意の同期先に移動できます。これを行うには、コネクタを追加し、コネクタへの認証を行い、接続を完了する必要があります。
    </p>;
};

export const driverVersion = "M";

export const siteNameShort = "Sync";

export const siteName = "CData Sync";

export const datasource = "MariaDB";
export const pageTitle = "MariaDB";
export const advancedurl = "SR";
export const oauthschemes = "AzureAD";

<CommonDatasourceIntroSource datasource={datasource} siteName={siteName} />

## MariaDB コネクタを追加

<CommonDatasourceAddConnector datasource={datasource} title={pageTitle} destination={false} siteNameShort={siteNameShort} />

## MariaDB への認証

After you add the connector, you need to set the required properties.

* **Server:** Enter the host name or the IP address of your server.
* **Port:** Enter the port for the {datasource} database. The default port value is **3306**.

{siteName} supports authenticating to {pageTitle} in several ways. Select your authentication method below to proceed to the relevant section that contains the authentication details.

* [**Password**](#password) (default)
* [**NTLM**](#ntlm)
* [**Azure Active Directory**](#azure-active-directory)
* [**Azure Password**](#azure-password)
* [**Azure Managed Service Identity**](#azure-managed-service-identity)
* [**LDAP**](#ldap)

### Password

<CommonAuthSchemePassword siteName={siteName} siteNameShort={siteNameShort} datasource={datasource} />

### NTLM

To connect with NTLM user credentials, specify the following properties:

* **Auth Scheme:** Select **NTLM**.
* **Domain:** Enter the domain name for your Microsoft Windows (NTLM) login.
* **NTLM Version:** Select the version for you NTLM. The default version is **1**.

### Azure Active Directory

To connect with your Azure Active Directory credentials, specify the following properties:

* **Auth Scheme:**  Select **AzureAD**.
* **Azure Tenant:** Enter the Microsoft Online tenant to which you want to connect. If you do not specify a tenant, {siteName} uses the default tenant.
* **OAuth Client Id:** Enter the client Id that you were assigned when you registered your application with an OAuth authorization server.
* **OAuth Client Secret:** Enter the client secret that you were assigned when you registered your application with an OAuth authorization server.

### Azure Password

To connect with an Azure password, specify these settings:

* **Auth Scheme:** Select **AzurePassword**.
* **Azure Tenant:** Enter the identifier (Id) of the Azure Tenant under which your OAuth and client applications were created. This Id is available under **Directory (tenant) ID** on the **Overview** page of one of the applications.

### Azure Managed Service Identity

<CommonAuthSchemeAzuremsi siteName={siteName} siteNameShort={siteNameShort} datasource={datasource} />

### LDAP

<CommonAuthSchemeLdap siteName={siteName} siteNameShort={siteNameShort} datasource={datasource} />

## 接続を完了する

To complete your connection:

1. Specify these properties:
   * (Optional) **Database:** Enter the name of the MariaDB database.
   * **Use SSL:** Select whether you want to enable Secure Sockets Layer (SSL). By default, the **Enable** checkbox is not selected.
2. Define advanced connection settings on the **Advanced** tab. (In most cases, though, you should not need these settings.)
3. {oauthschemes ? `If you authenticate with ${oauthschemes}, click` : "Click"} **Connect to {datasource}** to connect to your {pageTitle} account.
4. Click **Create & Test** to create your connection.

## Enable Binary Logging (for Change Data Capture)

Change data capture (CDC) is enabled automatically for the {datasource} database. However, you must enable binary logging for {datasource} replication. *Binary logs* record transaction updates so replication tools can generate changes. You need the following prerequisites in order to enable binary logging:

* a {datasource} server
* the appropriate {datasource} user privileges

### Enable Binary Logging

1. Determine whether binary logging is enabled by submitting the following statement from a {datasource} prompt:

   ```
   SHOW VARIABLES LIKE 'log_bin';
   ```

   If the option is not enabled (that is, your receive an `OFF` message), configure the following options in the {datasource} Server configuration file:

   ```
   server-id         = 223344
   log_bin           = mariadb-bin
   binlog_format     = ROW
   binlog_row_image  = FULL
   expire_logs_days  = 10
   ```

   Descriptions of these options are available in [{datasource} Binary-Logging Configuration Properties](#mariadb-binary-logging-configuration-properties).

2. Verify that binary logging is enabled by resubmitting this statement:

   ```
   SHOW VARIABLES LIKE 'log_bin';
   ```

### {datasource} Binary-Logging Configuration Properties

This section describes the values for options that are used earlier in step 1:

* `server-id`: This value is a unique Id for each server and each replication client in the {datasource} cluster.
* `log_bin`: The value for this option is the base name of the sequence of binlog files.
* `binlog_format`: The format value for this option is must be set either to `ROW` or `row`.
* `binlog_row_image`: The value for this option must be set to `FULL` or `full`.
* `expire_logs_days`: This value is the number of days before the binlog file is removed automatically. The default value is `0`, which means that there is no automatic removal. Set the value to match the needs of your environment.

## 詳細について

<CommonDatasourceMoreInformation datasource={datasource} advancedurl={advancedurl} siteName={siteName} driverVersion={driverVersion} />